Homemade Baby Crib Bedding

If one is machine piecing they can use the flag method and join a few pairs of patches at the same time. The right sides are pinned together in pairs. Using the foot as a guide one along the seam line machine stitches. Between the pairs a short uncut thread should be left. Each is then cut into units. Enough pairs are then joined to make a patched piece. Avoid bulk by pressing flat to one side the patch seams.

Choosing for the right blankets for baby is simple. Just check look first on its quality. It should be smooth and soft. Next is to inspect the manner by which it was tailored. And lastly, see if the price is right.

Blanket Quilt Turn and press this rectangle over the seam allowance, again pressing away from the center piece. Trim the seam allowance close to the stitching line.

In the early days of quilting, any suitable material, from an old blanket to cotton wadding, was placed between the patched pieces and an old sheet and then put onto the quilting frame, which kept the quilt's layers stretched tight while the quilter worked away.

You don't have to be an expert quilter to make a special handmade baby crib quilt. First, you need to choose the perfect fabric for the baby crib quilt. If you're unsure of what design you might prefer, either take a trip to your local fabric store, or go on line to the one of the many retail dealers for their collections of ideas and baby crib quilt patterns. If this is your first attempt at the art of quilting, it is best to keep your pattern simple. Choose colors that are appropriate for the baby's gender, unless you do not know that, than yellow or white is a safe choice. Be sure you wash and lightly iron all fabrics before you start to cut.

I cut the denim into 4 inch squares and lay them out on the floor until I get the look I want. If your are using child sized jeans you may want to make smaller squares or even alternate between a 4 inch square and one that is made of 4 squares, 2 inches wide. Be creative. Your quilt blocks can be triangles, diamonds or what ever shape you choose. It is your design so let your imagination run.

Never dry on high heat. Use low temperature to start the drying process then remove it from the dryer and lay it flat to finish drying. Once it is nearly dry, you can put it back in the dryer on low or air for a short time to fluff it up and finish drying.